1
K M -1 1 2
Vocal Mixer with Computer Audio Interface
®
User Manual
NOTE: To ensure your equipment works safely and to its fullest potential, please
read this User’s Manual carefully before operating, and keep for future reference.
ank you for purchasing Acesonic’s KM-112
Vocal Mixer with Computer Audio Interface. At
Acesonic, we take pride in providing you with the
most advanced, highest quality products on the
market. With proper care you will get many years of
satisfying use from your Acesonic product.
Table of Contents
Parts Checklist.....................................................1
First ings First .................................................1
Care and Cleaning ...............................................2
Review of KM-112 Features ...............................2
Technical Specications ......................................3
Front Panel Operations and Functions ................3
Rear Panel Operations and Functions .................4
Recording and Playback with Computer .............4
Cable Connections and Setup .............................5
Troubleshooting ..................................................6
FCC Advisory and Safety Warnings ...................7
Using Your KM-112 Safely .................................7
Parts Checklist
Your Acesonic KM-112 system includes:
• Acesonic HM-702 mic with 14-ft. cable (1)
• USB A-to-B cable (1)
• KM-112 Vocal Mixer and Computer Audio
Interface (1)
• RCA cable, RCA red/white/yellow both ends (1)
• Mini-jack-to-RCA cable (1)
• User Manual (1)
• Warranty Registration Card (1)
Be sure to keep original packaging in case re-shipping
is required for returns or repairs.
First Things First
Before using your new equipment, there are a few
things you should do and know:
• IMPORTANT: Check to see that your local power
outlets supply the correct voltage for the AC adapter.
Note: Be certain you have selected the correct voltage
setting on the rear panel switch before using device.
(See “Rear Panel Operations and Functions” on page 4
and refer to item number 5.)
• Do not dismantle the device on your own. For
needed repairs, contact the local distributor or autho-
rized service center.
• When the system will not be used for a long time,
disconnect the power plug from the wall (as well as
the back of the receiver).