AKG Acoustics C547BL Microphone User Manual


 
C 547 BL
Boundary Layer Condenser Microphone
Description
The C 547 BL is a condenser boundary layer microphone
with a hypercardioid pickup pattern. Its rugged construction
permits it to be used on the floor, where it can withstand
accidental footsteps. It has a switchable low frequency roll-
off filter to minimize footfalls on stage. The microphone
works as well on a tabletop.
Microphone sensitivity is 8.5 mV/Pa, and total harmonic
distortion (THD) is 1% at an acoustical operating level of
133 dB. The equivalent noise floor is 22 dB-A. The
microphone operates on phantom powering over the range of
9 to 52 volts dc. The finish is matte black, and the
microphone can be painted any color to match decor.
The connector is a 3-Pin XLR.
Features
Non-crush construction
Inconspicuous
Unidirectional pickup
Paintable
Specifications
Transducer Principle: Condenser prepolarized
Frequency Range: 3018,000 Hz
Polar Pattern: Hypercardioid
Sensitivity at 1,000 Hz: 8.5 mV/Pa (-42dBV)
Equivalent Noise Level: < 22 dB-A
Sound Pressure Level for 1% THD: 133 dB
S/N Ratio (A-weighted): > 72 dB
Electr. Impedance: < 400 ohms
Load Impedance: > 1,000 ohms
Low frequency roll-off: switchable bass-cut
12 dB/octave, 200 Hz
Power Requirement: 952 volts phantom powering
Connector: 3-Pin XLR-type
Cable Length: 10 ft. (3 m)
Finish: Matte dark gray
Size: 7.3 x 4.7 x 0.8 in.
(185 x 120 x 20 mm)
Net/Shipping Weight: 5.6 oz. (160 g)/14.8 oz. (420 g)
Included Accessories: W 547 Windscreen
Optional Accessories: B 18 Battery power supply