Filter
Top Products
C 12 VR
Tube Condenser Microphone
Description
The AKG C 12 VR (Vintage Reissue) is the modern
equivalent to the classic C 12 produced beginning in 1953.
The C 12 VR continues to set the standard for quality,
providing its famed warmth and presence, which are direct
results of its unique tube (6072), diaphragm and transformer
design. Internal microphone switching is provided for pre-
attenuation of -10 dB, -20 dB, and +10 dB boost. The
available pick up patterns include omnidirectional, cardioid,
and figure-eight with six intermediate patterns. The nine
remotely selectable pickup patterns make the C 12 VR a
necessity not only for vocals, but for instrumental solo
recording, as well.
The C 12 VR comes with its own professional flight case,
power supply (N 12 VR), elastic suspension (H 15/T), 30 ft.
multi-conductor connecting cable (MK 12 VR), and foam
windscreen (W 42).
Features
• Classic 1-inch (25 mm) condenser
tube performance of the original
AKG C 12
• Multiple patterns (nine total)
remotely controlled with silent
switching
• Uses the original 6072 vacuum tube
• Uses the original 1950’s dual
diaphragm design for sound that
has the same warmth, clarity and
presence of the original
• Internal microphone switching for
pre-attenuation of -10, -20 dB and
boost of +10 dB to accommodate
all studio requirements.
• External (in control unit)
two-position bass cut/roll-off
Specifications
Transducer type: Dual diaphragm, 1 in. (25 mm) diameter
Diaphragm material: Gold sputtered mylar foil.
Frequency response: 30 Hz - 20 kHz
(±2.5 dB from published curves)
Polar patterns: Omnidirectional, cardioid, and figure-8,
with 6 intermediate patterns (silent switching)
Impedance: 200 ohms (±25%)
Recommended load impedance: 1000 ohms or greater
Output connector (from control unit): XLR (pin 2 positive)
Output connector (from microphone): Tuchel 12-pin
Sensitivity at 1 kHz: 10 mV/Pa for all patterns; -40 dB
(dB re 1 V/Pa)
Equivalent noise level (A-weighted): 22 dB (DIN 45412)
Sound pressure level for 3% THD: 128 dB (equivalent to 50
Pa)
Pre-attenuation: -10 and -20 dB (at microphone)
Sensitivity increase: 10 dB (at microphone)
Low frequency roll-off/bass cut: two-position (at control unit)
Power requirement: 115/230 Vac
Microphone size: 1.65 in. dia (42 mm)
8.9 in. long (225 mm)
Microphone net weight: 24 oz. (0.68 kg)
Shipping weight: 10 lb. (4.5 kg)
Accessories included: Aluminum flight case
N 12 VR remote power supply
H 15/T elastic suspension
MK 12V R 30 ft. (10 m) connecting cable
W 42 Foam windscreen