Filter
Top Products
C 2000 B
Stage and Studio Condenser Microphone
Description
The C 2000 B is a versatile, side-address cardioid condenser
microphone intended for professional and home studio
applications as well as on-stage activities. It consists of a patent
pending one-half inch capsule element which is placed in a
larger baffle ring. This measure gives the C 2000 B more
forward directionality at high frequencies. The microphone’s
response is tailored to have a broad on-axis rise at high
frequencies, while maintaining a fairly uniform diffuse field over
the entire frequency band. The added presence at very high
frequencies is an asset in many micing situations, especially
home recording studios, while maintaining good feedback
rejection in live sound applications.
Its 0.5% THD point of 140 dB (150 dB with the integral 10-dB
pad engaged) and high sensitivity of 20 mV/Pa indicate that this
model can deliver maximum operating output signals in the
range of 4 volts. The self-noise floor is 20 dB (A), giving the
microphone an effective dynamic range of 120 dB. An integral
bass cut switch provides a gentle 6 dB per octave roll-off below
500 Hz, and as such will compensate for the proximity effect
(low frequency boost) associated with close micing.
The cardioid polar pattern, has been refined to give maximum
rejection across the frequency band at 180 degrees. Internal
shock mounting of the diaphragm assembly makes this model
studio friendly and easy to use in demanding live performances.
The SA41/1 stand adapter is included. Optional accessories
include the B18E battery supply unit and the H 100 external
elastic shock suspension.
Features
• Wide dynamic range of 120 dB
• Transformerless output for ultra
low LF distortion
• Frequency response shaped for
studio applications and highest
gain before feedback
• Pre-attenuation (-10 dB)
• Bass roll-off provided (6dB/octave
below 500Hz)
• Dedicated cardioid polar pattern
Specifications
Transducer type: Prepolarized condenser
Frequency response: 30 Hz to 20 kHz
Sensitivity at 1 kHz: 20 mV/Pa (-34 dBV)
Polar pattern: Cardioid
Pre-attenuation: 10 dB
Bass cut filter: 6 dB/octave below 500 Hz
Impedance: 200 ohms
Recommended loading: >1000 ohms
Equivalent noise level (A-weighted): 20 dB
Sound pressure level for 0.5% THD:
140 dB (150 dB with 10 dB pre-attenuation)
S/N ratio (A-weighted): 74 dB
Power requirement: Phantom powering, 9 to 52 Vdc
Current consumption: <2 mA
Output connector: 3-pin XLR-M
Finish: champagne
Size: 2.1 in. diameter (53 mm);
6.3 in. length (159 mm)
Net/shipping weight: 11.5 oz. (325 g)/2.1 lb. (950 g)
Included accessories: SA 41 stand mount
Optional accessories: B 18 E battery power supply
H 100 elastic shock suspension