Filter
Top Products
C 419
Wind Instrument Micromic
Description
The AKG C 419 is response tailored for use with both brass
and woodwind instruments. The gentle low frequency roll-off
compensates for proximity effect and the high frequency boost
adds presence and clarity. Its hypercardioid polar pattern gives
the C 419 additional isolation from floor monitors and other
instruments.
The microphone is small, light weight, and can be easily
clipped to the bell of an instrument. The flexible gooseneck
allows for precise capsule placement, while the rubber-tipped
clamp ensures secure mounting and protects the instrument
from damage. The C 419 features a 10 ft. (3 meter) cable
terminated with an XLR-M connector. It accepts phantom
voltages over the range of 9 to 52 volts. The C 419 L is
terminated with a TA3-F, mini-XLR connector compatible with
AKG wireless bodypack transmitters or the optional, B 29 L
battery operated phantom power supply.
Features
• External shock mounting for
excellent isolation
• Rubberized clamp for simple and
secure mounting
• Miniature gooseneck extension for
precise placement
• Adaptable to phantom powering or
wireless operation
• Hypercardioid pattern for good
isolation from other players and
floor monitors
Specifications
Transducer type: Condenser pressure gradient
Frequency response 20 Hz - 20 kHz
Polar pattern: Hypercardioid
Impedance: 200 ohms
Output connector: XLR, mini XLR (C419/L)
Sensitivity: 7 mV/Pa; -43 dB (re 1 V)
Powering: Phantom powering from 9 to 52 Vdc
Sound pressure level for 1% /3% THD: 126/130 dB
Size: (7.1” x 1.4”) including clamp
(180 mm x 35 mm)
Net weight: 5.1 oz. (141 g)
Shipping weight: 16.8 oz. (462 g)
Standard accessory W 44 Windscreen
Optional Accessories: B 29 L Battery operated phantom power
supply with a 2 input mixer.
(used with the C 419 L version)
WMS 40, 80, 61, 81 wireless
microphone system
(used with the C 419/L)