Filter
Top Products
C 430
MicroMic Series III Instrument Condenser Microphone
Description
The C 430 is the latest addition to the MicroMic Series III.
Its small size, high SPL handling and frequency shaping
make it ideal for on-stage or in-studio instrument and
percussion micing applications. Its uniform cardioid polar
pattern means that the mic “hears” more evenly from the
sides. This is the best choice for instruments that radiate
sound from many directions like acoustic guitar, piano,
saxophone and percussion instruments. This is also a good
trait for better gain before feedback when used on stage.
Features
• Small diameter, light-weight, short
body condenser cardioid
microphone
• Response optimized for close-in
instrument and percussion
applications
• Transformerless output for ultra low
LF distortion
• Universal phantom powering
• Suited well for percussion overhead
micing applications
• Battery powering possible with
optional B 15 power supply
Specifications
Transducer type: Prepolarized condenser
Frequency response: 20 Hz to 20 kHz
Sensitivity at 1 kHz: 7 mV/Pa (-43 dBV)
Polar pattern: Cardioid
Impedance: 200 ohms
Recommended loading: >2000 ohms
Sound pressure level for 1%/3% THD: 126/130 dB SPL
Power requirement: Phantom powering, 9 to 52 Vdc
Output connector: 3-pin XLR-M
Finish: Matte black
Size: 0.75 inches diameter (19 mm);
3.1 inches length (79 mm)
Net weight: 1.1 ounces (31 g)
Included accessories: SA40 Stand adapter
Optional accessories: B 15 in-line phantom power supply