American DJ Spiral Graph DJ Equipment User Manual


 
SPECIFICATIONS: MODEL -
Spirograph
Weight: 8 lbs.
Size: 8.5" H x 8" W x 15" L
Lamp: ZB-EXN 12V 50W
Fuse: 3A
Voltage In: 120V
Working
Position: Any Safe position
Duty Cycle: None
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058 USA
CAUTION! Read instructions before installing or plugging unit in.
Thank you for purchasing the Spiral Graph™ by American DJ®. For your convenience the Spiral
Graph™ has been lamped and is ready to be used, there is no assembly required. Please read the fol-
lowing instructions before installing or using your new Spiral Graph™.
Operating Instructions:
Unit is ready to be hung or set on flat surface. Unit will rotate wheel slowly making a unique, vibrant kaliedoscopic effect
that produces a multi-colored and multi-textured effect . Motor rotation will start when unit is turned on/off. For best
results,shine on a light colored wall or ceiling. we suggest using fog or special effects smoke when using this unit. This
will enhance the effect allowing you to see the beams of light. Use an American DJ® high quality mobile pro fog machine.
Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember
always replace same lamp and fuses.
Lamp replacement: Remove single knurled screws from top of unit, , and remove top panel and disconnect lamp from
socket. Remove and replace lamp.
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly suscepti-
ble to damage if impro p e r l y
handled. Never touch lamp with
bare fingers as the oil from your
hands will shorten lamp life. Also,
never move fixture until lamp
has had ample time to cool.
R e m e m b e r, lamps are not cov-
ered under warranty conditions.
American DJ
®
User Instructions