Ampeg B5R Musical Instrument Amplifier User Manual


 
OUT OUT
OUT OUT
OUT OUT
IN OUT
IN IN
IN
IN
6
Some Suggested Settings
SVT: SVT OVERDRIVEN:
FUNK: ALTERNATIVE CLEAN:
LOUD CLEAN ROCK: HARD-DRIVEN ROCK:
LAYERED BASS W/GUITAR MIX:
POWER TRIO:
Since so many variables affect
the actual sound of any system,
the following settings are
offered as starting points to
help you find the exact sounds
your playing demands. When
using the B5R, please keep in
mind the following points:
The Volume and Gain controls
are used together to set the
relative levels of each channel
and the octave signal.
The Master control should be
set to produce the appropriate
output volume level.
Rack Mounting
When mounting the amplifier into a rack, the four bottom feet should be removed to maintain the three rack space height of the ampli-
fier. Be sure to keep the feet and their attachment bolts for future use. If the feet are reinstalled, never use screws which will protrude
farther into the amplifier than the original hardware.
The rack must be a high quality enclosure capable of securely supporting the weight of the amplifier. Tighten the mounting screws
securely through the amplifier’s face plate, into the rack rails. Check the rack and mounting screws occasionally to ensure a continual-
ly safe and secure installation.
B5R Bass Amplifier