Filter
Top Products
CHORUS SPACE-C CC300
Thank you for showing your confidence in us by purchasing the BEHRINGER CHORUS
SPACE-C CC300. This ultimate effects pedal comes with 4 dedicated space presets that
let you add a breathtaking third dimension to your sound or instrument. Experience the
secret weapon of professional recording studios.
The chorus effect adds a shifting detuned signal to the original, similar to playing in
unison in a group of instruments, and it is often used for dispersing sounds.
1. CONTROLS
Top view
The MODE SELECTOR switches let you choose between 4 dedicated space
presets. Use these presets in any combination or even activate them at the same
time. This results in 16 combinations giving you a wide range of spacious effects.
The effect gets deeper from the left to the right.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use
both connectors if you want to achieve full stereo chorus effect. For mono use
plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The CC300 has no on/off switch. As soon as you insert the plug into the IN
connector, the CC300 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.