Behringer eg2180 Electronic Keyboard User Manual


  Open as PDF
of 4
 
EUROGRAND EG2180
Modesty Panel Assembly 3
Side Panel and Pedal Box Assembly 2.
Position the Pedal Box 1. {4} against the Left Side Panel {2} and then use two screws {7} to fasten the side panel. Finally, attach
a plastic cap to each screw.
Position the Pedal Box 2. {4} against the Right Side Panel {3} and then use two screws {7} to fasten the side panel. Finally,
attach a plastic cap to each screw.
You can nd the pedal cable in the Pedal Box 3. {4}. Untie and straighten out the cable attached to the bottom of the Pedal Box.
Modesty Panel Assembly3.
Position the holes of the Modesty Panel 1. {5} against the holes of the side panel brackets and then use two screws {8} with at-
tached washers to fasten the top of the Modesty Panel.
Use three screws 2. {8} with attached washers to fasten the bottom of the Modesty Panel.
Use the cable clamp to take up any slack in the pedal cable.3.
 previous