Filter
Top Products
EUROGRAND
Advanced operation 17
Saving parameter settings5.6.5
The EUROGRAND allows you to save the changes made to the
instrument’s settings, so that they won’t get lost when the unit is
powered down. When the save function is not active, all changes
made to the settings – except for the music sequencer data – will
be lost when you switch the piano off. When switched back on,
the EUROGRAND recalls the factory default settings.
The save function can be activated separately for the following
groups of functions: sounds, MIDI, tuning and damper pedal.
Please enter EDIT mode (see chapter 5.1) and select the +
following function.
Sounds >
You can save the following settings for this group of functions:
Sounds (see chapter 2.4) =
Layer mode settings (see chapters 4.1 and 5.3) =
Type of room effect and intensity (see chapter 4.2.2) =
Type of modulation effect and intensity (see chapter 4.2.3) =
Key velocity (see chapter 5.6.1) =
Metronome meter and tempo (see chapter 5.4) =
Dimmed volume (see chapter 5.5.5) =
Function: E8.1
Value: On, Off
Description:
Off: Save function for sounds is disabled (default
setting)
On: Save function for sounds is enabled
MIDI >
You can save the following settings for this group of functions:
All MIDI settings (see chapter 6.3.3) =
Function: E8.2
Value: On, Off
Description:
Off: Save function for MIDI settings is disabled
(default setting)
On: Save function for MIDI settings is enabled
Tuning >
You can save the following settings for this group of functions:
Transposition (see chapter 5.2) =
Fine tuning (see chapter 5.6.3) =
Tuning (see chapter 5.6.4) =
Function: E8.3
Value: On, Off
Description:
Off: Save function for tuning settings is disabled
(default setting)
On: Save function for tuning settings is enabled
Soft pedal >
You can save the following settings for this group of functions:
Soft pedal function (see chapter 5.5.8) =
Soft pedal intensity (see chapter 5.6.2) =
Function: E8.4
Value: On, Off
Description:
Off: Save function for soft pedal settings is disabled
(default setting)
On: Save function for soft pedal settings is enabled
Restoring the factory default settings5.6.6
Use the following procedure to recall the factory default set-
tings.
Tip: All saved parameters as well as the music se- +
quencer data will be lost during either one of the fol-
lowing procedures.
Use the POWER switch to switch the instrument off (if not 1)
already done).
Play and hold down the top C key on the keyboard, then 2)
switch the EUROGRAND back on.
+
An alternative procedure is described below:
Use the POWER switch to switch the instrument off (if not 1)
already done).
Press and hold down the TRACK 1 and TRACK 2 buttons, 2)
then switch the EUROGRAND back on.
+
Let go of the TRACK buttons after about 5 seconds.3)