Filter
Top Products
9
ULTRAGRAPH PRO FBQ1502/ULTRAGRAPH PRO FBQ3102/ULTRAGRAPH PRO FBQ6200
4. INSTALLATION
4.1 Rack mounting
The FBQ1502 requires one height unit (1 HU) for mounting in a
19" rack, the FBQ3102 two height units, and the FBQ6200 three
height units. Please allow at least an additional 4" of space for
the connectors on the back panel.
Be sure that there is enough space around the unit for cooling
and please do not place your ULTRAGRAPHPRO on high-
temperature devices such as power amplifiers etc. to avoid
overheating.
For rack mounting, please use M6 metal nuts and bolts.
4.2 Audio connections
You will need many different cables for the various
applications. The following illustrations show how these cables
should be laid out. Please use exclusively high-grade cabels.
The ULTRAGRAPH PRO is installed with electronically servo-
balanced inputs and outputs to avoid hum noise problems.
You can, of course, also connect unbalanced devices to the
balanced inputs/outputs. Either use mono plugs, or connect the
ring and sleeve of stereo plugs (bridge pin 1 and pin 3 when
using XLR connectors).
+ Please ensure that only qualified personnel install
and operate the ULTRAGRAPH PRO. During
installation and operation the user must have
sufficient electrical contact to earth. Electrostatic
charges might affect the operation of the unit.
Fig. 4.1: XLR connectors
Fig. 4.2: 1/4" TS connector
Fig. 4.3: 1/4" TRS connector
Fig. 4.4: 1/4" TRS connector for insert send/return
applications
4. INSTALLATION