Behringer OD400 Music Pedal User Manual


  Open as PDF
of 2
 
OVERDRIVE OD400
Ultimate Overdrive Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER OVERDRIVE OD400.
This eects pedal is ideally suited for electric guitars, which need a boost in order to overdrive a
subsequent amp. Thanks to its high-performance features you can create state-of-the-art overdrive
sounds for almost any application.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The TONE control allows you to shape your overall sound.
(3) The DRIVE control adjusts the amount of the overdrive/distortion eect.
(4) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument cable.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊ The OD400 has no on/o switch. As soon as you insert the plug into the in connector,
the OD400 is on. When not in use, remove the plug from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the underside.
(1)
(2)
(7)
(3)
(4)
(6)
(5)