Dynacord 1000-3 Music Mixer User Manual


 
POWERMATE
3
29
3 Display & functions
The PowerMate includes a premium OLED display. Compared to general LC displays the OLED display is brighter, has
a greater contrast ratio and a wider viewing angle.
3.1 Effect mode
The start screen appears after switching the PowerMate
on. After a few seconds the default effect for FX 1 & FX 2
and other system parameters are displayed.
Pressing the function keys below the display allows selec-
ting an effect in a quick and easy way.
3.2 Menu mode
Press the MENU/ENTER rotary encoder in effect mode to
access the menu mode. When entering the menu mode
the main menu (see illustration 3-5) is indicated.
In menu mode the MENU/ENTER rotary encoder and the
four function keys below the display are used for naviga-
tion and for selecting and editing parameters. Turn the
MENU/ENTER rotary encoder to the left or to the right to
move the cursor in the menu. Press the MENU/ENTER ro-
tary encoder to select or execute the highlighted menu
item. If a menu entry was highlighted, the corresponding
dialog is opened. If a parameter was highlighted, the val-
ue is shown in inverse font and can be edited by turning
the MENU/ENTER rotary encoder. Press the MENU/EN-
TER rotary encoder again to apply the edited parameter
value. The bottom line of the display indicates the func-
tion for the four function keys. The following table de-
scribes some of the functions avialable in menu dialogs.
Illustration 3-1: Effect mode
BRIGHT HALL MONO DELAY
MAX LPN HIGH USB MIDI
5 55
Large Hall 3 230 ms 40%
FX1 FX2
12
3
4
5
6
7
8910111213
14
15
16
Number Description
1 Speaker Protection indicator
2 Speaker (LPN) Processing indicator
3 USB / PEAK indicator
4 MIDI indicator
5 Effect group of effect unit FX 2
6 Effect number of effect unit FX 2
7 Effect description of effect unit FX 2
8 Increases the effect number of effect unit FX 2 by one
9 Description of function key
10 Decreases the effect number of effect unit FX 2 by one
11 Increases the effect number of effect unit FX 1 by one
12 Description of function key
13 Decreases the effect number of effect unit FX 1 by one
14 Effect description of effect unit FX 1
15 Effect number of effect unit FX 1
16 Effect group of effect unit FX 1
Illustration 3-2: Access the menu mode by pressing the MENU/
ENTER rotary encoder
Illustration 3-3: Main menu in menu mode
Edit FX 2
Main Menu
USB Record Routing
Equalizer Routing
Edit FX 1
BACK ESC
Function Description
BACK Returns to the next higher menu level.
ESC Discards all edits in the dialog and returns to effect mode.
or
Move the cursor to the left or to the right.
SAVE Opens the FX User Presets list to store the edited effect as an
user preset.
OK Confirms the entry, e. g. when editing the name of an user pre-
set.
Table 3-4: Functions of the function keys