Filter
Top Products
PAGE 219
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
APPENDIX I - WIRELESS KEYBOARD
Programming the Keyboard to Control an Escient FireBall
Follow these instructions carefully, to re-program the keyboard for the Escient FireBall
1) Press and Hold the “SET” button until the red LED ashes twice.
2) Slowly enter “997”. The red LED should ash twice.
3) Press the blue “CH-” key on the left side of the keyboard until the red LED ashes
four times.
4) Press the ‘swoop’ button (the one just to the right of the POWER button).
5) Press and Hold the “SET” button until the red LED ashes twice.
6) Slowly enter “1163”.
The wireless keyboard should now control the Escient FireBall.