Filter
Top Products
PAGE 66
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
CHAPTER 3 - GETTING STARTED
Quick Start - IP Addressing
|
For HPNA (FireBall only) and Ether-
net connections, you will be asked
what type of IP Addressing to use.
In most cases this can be left as
DYNAMIC.
If your network requires static IP
addresses, select static and go to
the next screen.
Quick Start - Static IP Info
}
If you are on an HPNA (FireBall
only) or Ethernet network and you
selected Static IP addressing, you
will see the Static IP Info screen.
Enter the IP address, subnet
mask, gateway address, domain
name servers, and DHCP client
ID information here. This informa-
tion should be obtained from your
network administrator or ISP.