Filter
Top Products
Lift the oven door by
placing one hand on
each side. The door is
heavy, so you may need
help. Do not lift the door
by the handle.
With the door at the same angle as the
removal position (halfway between the
closed and broil stop position, seat the
notch of the hinge arm into the bottom
edge of the hinge slot. The notch of the
hinge arm must be fully seated into the
bottom of the slot.
7
6
Push the hinge locks up against the front
frame of the oven cavity, to the locked
position.
Close the oven door.
10
9
INSTALL THE RANGE
(CONT.)
Bottom edge
of slot
Hinge arm
Hinge notch
Notch of hinge
securely fitted
into bottom of
hinge slot
Hinge in
locked position
REPLACING THE OVEN DOOR
NOTE: The oven door is heavy. You may need
help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by
the handle.
Open the oven door as far as it will open.
8
CHECK FOR PROPER
INSTALLATION OF
ANTI-TIP BRACKET
Lower the oven door and gently apply medium
force at the handle end until movement of the
range is detected. Continue pressing until the
anti-tip bracket is engaged and movement
stops. A small amount of movement is
acceptable at the back of the range top, but it
should be stable and not tip once the anti-tip
bracket is engaged.
11
12
Installation Instructions