Filter
Top Products
REAR PANEL CONTROLS
-11-
(20) MIC INPUT
This RCA female connector is used as a microphone
input. This connector works independent of the Mic Select
switch (18) and may be used for another audio input
source such as a microphone. The impedance of this
input is set by the Audio Input 3 position toggle switch (4).
(21) AUX INPUT
This 5 Pin Din connector allows audio to be brought into
the EQplus from an external device..This connector
works independent of the Mic Select switch (18) and may
be used for another audio input source such as a
W2IHY 8 Band EQ. The impedance of this input is set by
the Audio Input 3 position toggle switch (4).
(22) PTT INPUT
This female RCA connector is for push to talk control. A foot
switch or other device may be connected. Grounding the
center of the connector grounds the push to talk line on the
selected Audio Output.
(22) OUTPUT SELECT
This three position rotary switch directs audio to one of 3
5 Pin DIN connectors (Output1, Output 2 or Output 3.)
Gnd
PTT
- AUDIO IN
+ Audio IN
AUX INPUT
5 Pin Male DIN
Din connectors shown
on side to be soldered