Filter
Top Products
13
Objects in the LCD screen and their
functions
To select an object displayed in the LCD screen, use the
[CURSOR] key to select it, and press the [ENTER] key.
In this manual, terms enclosed in “quotation
marks” such as “...”, “...” button, or “...” tab refer to
objects in the LCD screen which you can operate.
Terms enclosed in square brackets such as [...] key,
[...] knob, [...] dial, or [...] fader refer to controls etc.
located on the top panel, front panel, or rear panel.
a: Current parameter display
This is the name of the parameter currently selected by
the edit cell.
For icon-type parameters such as EQ or fader, the value
is displayed at the right.
b: Edit cell
When you select a parameter in the LCD screen, the
parameter value will be highlighted in some cases. This
area is referred to as the edit cell, and your editing will
apply to the highlighted portion.
The parameter value in the edit cell can be modified
using the [VALUE] dial (→p.8) or by using the popup
buttons in the LCD screen.
c: Popup button
When you select this button and press the [ENTER] key,
a dialog box (f) will appear.
To enter a parameter value, choose the desired value
from the dialog box.
, ,
d: Toggle button
This type of button will turn the corresponding func-
tion on/off each time you press the [ENTER] key.
(on)/ (off)
e: Tab page
Each mode contains numerous parameters, which are
organized into pages. Each page is accessed by its own
tab.
f: Dialog box
Select the “OK” button to execute the function (or select
the “Cancel” button to cancel without executing), and
press the [ENTER] key. The dialog box will close.
g: Radio buttons
These buttons are used to select one of multiple items.
Select one radio button and press the [ENTER] key.
h: Icons
These are objects shaped like sliders or knobs. To mod-
ify a value, select it and rotate the [VALUE] dial.
i: Scroll buttons
These buttons are used to view parameter values that
cannot be displayed in a single screen.
Objects in the LCD screen
e: Tab
a:Current parameter
display
c:Popup
button
d:Toggle
button
b: Edit cell
g: Radio buttons f: Dialog box
h: Icons
i: Scroll buttons
Introduction
Objects in the LCD screen and
their functions