22
3. Selecting another song
This section explains how to select songs.
There are three ways to select an existing song.
[STOP] key + [FF] key, [STOP] + [REW] key
Use this method to select the song of the previous or
next number on the same drive.
• Hold down the [STOP] key and press the [FF] key
to move to the end of the current song. Press these
keys once again to move to the beginning of the next
song.
• When you hold down the [STOP] key and press the
[REW] key, you will move to the beginning of the
previous song if you were already at the beginning
of the song (e.g., “000:00.000”). If you were at a loca-
tion during the song, you will move to the beginning
of that song.
Move the edit cell to the song number, and
rotate the [VALUE] dial
Use this method to select another song in the same
drive.
1 Press the [SONG] key to access the “SelSong” tab
page.
2 Select “SongNumber
” (it will be highlighted),
and rotate the [VALUE] dial to select the song
num.
Select from the song list (Selecting a song
from another drive)
Use this method to select another song in the same
drive, or to select a song from another drive.
1 Press the [SONG] key to access the “SelSong” tab
page.
2 Select the “ ” button at the left of the song num-
ber, and press the [ENTER] key.
The song list will appear.
3 Rotate the [VALUE] dial to select a song in the
song list. Then select the “OK” button and press
the [ENTER] key.
To change the drive
To change the drive, select the “Drive” button, press the
[ENTER] key, and select a drive from the list. Select the
“OK” button and press the [ENTER] key to return to
the song list.
Drive ID
Each connected drive is assigned a different “Drive
ID” according to its SCSI ID.
I: Internal IDE (internal drive)
A–G: SCSI ID numbers 0–6
if you connect a CD-R or CD-RW drive to the
[SCSI] connector, set the SCSI ID of the drive to “6”
(assigning it to “G”). A hard disk drive can also be
assigned this number.
If a CDRW-1 (sold separately) is installed, it will be
assigned to “G.”
If Drive ID “G” is assigned to a connected CD-
ROM drive, a CD-R or CD-RW drive, or a hard
disk, the internal CD-RW drive option cannot be
used.
Device Type, Total Size
This shows information on the drive (type and
capacity).
HDD: Hard Disk Drive
RMD: Removable Disk Drive
CD: CD-ROM, CD-R, CD-RW
* Removable disk drive is a collective term for
drives from which the disk can be removed, such
as MO, Zip, or Jaz.
Format Type
This shows the format type of the drive.
Internal drives of the D12 and external drives for-
matted or initialized while connected to the D12
are displayed as playable drives (i.e., that can be
used to create songs). Other drives will be dis-
played as backup drives.