Filter
Top Products
86
8a. SelectFadeMode....................................... [A...F]
A type: This curve is ideal for conventional fade-in.
B type: This curve is ideal for creating cross-fades
where two tracks are faded-in/out at the identical
time location.
C type: This curve inverts the A curve, lengthening
the sound that is heard.
D type: Fade-out using the A type curve.
E type: Fade-out using the B type curve.
F type: Fade-out using the C type curve.
Press the “OK” button to finalize the selected fade
type, or press the “Cancel” button to cancel the set-
ting.
EditType: “NormalizeTrack”
If the recorded level is too low, this command can be
used to boost the specified region (IN–OUT) of track
data so that the peak level will be the maximum level
before clipping.
When this command is executed (“Exec.”), the nor-
malize destination track will be overwritten.
2. DestTrack.................................[1...12, 1–2...11–12]
Select the normalize destination track.
For a 24 bit song, only up to tracks 5–6 can be
selected.
3. Exec. (Execute)........................................................
Execute the track editing command.
4. Wave .....................................................................
This displays the audio data of the track as a wave-
form.
Here you can set the editing locations (IN, OUT,
TO) more precisely. (→p.81 EditType: “CopyTrack”)
P4 Import: Import a WAV file
A WAV file saved on a FAT 16 DOS format external
SCSI drive can be pasted into a D12 track. (→”Note
when using a DOS format disk”)
You can also import this data into the clipboard, and
paste it into a location other than the beginning of the
track.
In the case of CD-ROM, CD-R, and CD-RW, the D12
supports WAV files saved on ISO9660 format discs.
Sub-directories are also supported for CD-ROM,
CD-R, and CD-RW.
For SCSI drives other than CD-ROM, CD-R, and
CD-RW, the D12 supports only WAV files that are
saved in the root directory of the first partition of
FAT 16 format.
The D12 can import WAV files of the following for-
mats.
Sampling frequency: 44.1 kHz
Quantization: 8 bit, 16 bit, 24 bit
Number of channels: 1 (monaural), 2 (stereo)
When this command is executed (“Exec.”), the
import destination track will be overwritten.
A certain amount of time is required when import-
ing or exporting WAV files. Here are some example
times when importing or exporting a five-minute 16
bit 44.1 kHz monaural WAV file from/to a Zip
drive.
Importing: approximately 9 minutes 20 seconds
Exporting: approximately 10 minutes 30 seconds
* The processing time will differ depending on the
format of the WAV file and on the SCSI device
you are using.
1. DriveList........................................................ [A...G]
Select the drive. For details on the drive numbers,
refer to “Drive ID” (→p.22).
2. WavFileList..............................................................
Select the WAV file.
Press the “OK” button to finalize the selection, or
press the “Cancel” button to cancel the selection.
When importing from CD-ROM, CD-R, or CD-
RW, sub-directories are also supported.
Sub-directories are displayed as [...] in the
WaveFileList screen.
To enter a sub-directory, select the desired [...]
and press the “OK” button. To return, select
“←” and press the “OK” button.
1
3
4
2
IN OUT
Max Level
IN OUT
Max Level
1 3
5
2 4