Filter
Top Products
38
Step 10. Song editing
On the D16, songs can be edited in the following ways.
Undo is not available for song editing.
Copying a song: Copy Song
This command copies the currently selected song to a
song number in any drive.
• You can use this to save a backup of your song on a
different hard disk drive etc.
• You can use this when creating different mixes or
arrangements of the same song.
Moving a song: Move Song
This command moves the currently selected song to
another song number in the same drive.
• You can use this to change the order of songs.
Deleting a song: Delete Song
This command deletes the selected song.
Protecting a song: Protect Song
This command protects the currently selected song so
that it cannot be modified.
If the protect setting is turned on for a song, an error
message will appear if you attempt to record that song.
It will not be possible to modify any of the parameters
of that song.
• Use this command to avoid accidentally modifying
a completed song.
Copying all songs in a drive: Copy All
Songs
This command copies all songs of the drive that con-
tains the currently selected song.
Here is the basic procedure for song editing operations.
For actual examples, refer to p.61.
Basic song editing procedure
1 Select the song that you wish to edit. (In the case
of “CopyAllSongs,” select the drive.)
2 Select the [SONG] “EditSong” tab page.
3 Select the type of editing operation, such as copy
or delete.
Select “EditType.” Press on the area to the right of
the “ ” button, and rotate the [VALUE] dial to
select the desired editing operation.
Alternatively, you can press the “ ” button to view
“Select EditSong Type,” select the desired editing
operation, and press the “OK” button.
4 Select the song that will be edited.
The LCD screen will differ depending on the “Edit-
Type.” The LCD display 2 shown here is for when
“CopySong” has been selected as the “EditT
ype.”
In the case of “CopySong,” the “SourceSong” will
show the copy source song you selected in step 1.
Use “Drive” to specify the copy destination drive,
and “DestSong
” to specify the copy destination
song.
5 Execute the song editing command.
Press the “Exec.” button to execute the specified
song editing command.
In the example shown, song 1 on the internal hard
disk will be copied to song 2. Songs that had been
located at song 2 and following will be moved
backward.
Song editing procedure