Filter
Top Products
51
Restore procedure
1 Use the [SONG] “SelSong” tab page or the [SYS-
TEM] “DiskUtil” tab page to select the restore desti-
nation drive.
2 Select the restore operation.
In the [SYSTEM] “B–U/Rst” tab page, select
“Restore” for “B–U/RstT
ype.”
3 Select the restore source drive (“Source”).
Press the “Drive” button to access the dialog box,
select the drive, and press the “OK” button.
4 Select the restore source song (“Sour
ce”).
For a drive that was backed up using “Backu-
pAllSongs,” you can select whether to restore all
songs or a single song. Use “Sour
ce” to select the
song that you wish to restore. To restore all songs,
select “***” (“SelectAll” in the dialog box).
5 When restoring a single song (“Backup1Song” or
“BackupAllSongs”), select the restore destination
song (“Destination
”).
6 Execute the restore operation.
Press the “Exec.” button. The display will ask “Are
You Sure,” so press the “Yes” button to execute.
7 If you are restoring a backup that extended across
two or more disks, the display will prompt you for
the next disk when the data of each disk has been
restore. Insert the next disk, and press the “OK”
button.
8 When restoring data from “Backup1Song” or
“BackupAllSongs” to internal drive “I,” you can
select whether or not the user data will be overwrit-
ten.
The display will ask “RestoreUserData,” inquiring
whether the user data that was saved at the time of
the backup should be written over the current data.
To overwrite, press the “Yes” button. To keep the
current data, press the “No” button.
If you overwrite the data, the previous data will be
lost.
9 When the operation has been completed, the dis-
play will indicate “Completed.” Press the “OK”
button.
P1 RecMode: Selecting the
recording mode
1. Select RecMode.........................[Input, Bounce]
Select the recording mode.
Input: The input (analog, digital, internal rhythm)
will be recorded. The recording level of each track is
adjusted by the channel faders. Select this for nor-
mal recording.
Bounce: The master LR bus will be recorded. The
playback level of each track is adjusted by the chan-
nel faders, and the recording level is adjusted by the
master faders.
You will select this mainly for the following situa-
tions.
• Pingpong recording (combining multiple tracks
to one or two tracks)
• Recording the sound processed by the master
effect
• Recording multiple inputs on one or two tracks.
When “Bounce” is selected, a maximum of two
tracks can be recorded simultaneously.
P2 Bounce: Settings for bounce
recording
For the procedure of bounce recording, refer to p.21.
1. Select BounceMode .........................................
[14Tr+2In→2Tr, 16Tr→2Tr]
Select the type of bounce recording.
14Tr+2In→2Tr: Select this when recording 14 tracks
of playback + 2 inputs onto two tracks, or when
recording 15 tracks of playback + 1 input onto one
track.
The input sound selected in the [INPUT] “Ch1–8”
tab page and “Ch9–16” tab page will be valid for
the channel(s) whose [TRACK STATUS] key is set
to REC (LED lit red), and will be recorded together
with the other playback tracks.
3. RECORD
1
12
Reference
SYSTEMRECORD