Filter
Top Products
58
4 Select the expansion/compression source track
number.
Set “Sour
ceTrack” to track “1.”
5 Select the expansion/compression destination track
number.
Set “DestT
rack” to track “2.”
6 Specify the number of times that the data will be
copied.
Set “T
imes” to “3.”
7 Execute the expansion/compression operation.
Press the “Exec.” button. The display will ask
“AreYouSure?” Press the “Yes” button to reverse
the data.
When the data has been expanded/compressed, the
display will indicate “Completed.” Press the “OK”
button.
8 Press the [TO/LOC3] key to move to the TO loca-
tion, play back, and check that the data was
expanded or compressed correctly.
You can use Undo to return to the state before exe-
cution (→p.73).
The longer the range (IN–OUT) that is specified for
this operation, the more time will be required for
processing before the display indicates “Com-
pleted.”
“CopyWholeTrk”: Copying an entire track
Here’s how track 1 can be copied to V-track “a” (=cur-
rently selected) of track 2.
1 Select the Copy Whole operation.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “CopyWholeTrk.”
2 Select the copy source track number.
Set “Sour
ceTrack” to track “1.”
3 Select the copy destination track number.
Set “DestT
rack” to track “2.”
4 Select the copy destination V-track.
Set “DestVT
rk” to V-track “a.”
5 Execute the copy operation.
Press the “Exec.” button. The display will ask
“AreYouSure?” Press the “Yes” button to copy the
data.
When the data has been copied, the display will
indicate “Completed.” Press the “OK” button.
6 Move to the beginning of the song, play back, and
check that the data has been copied correctly.
You can use Undo to return to the state before exe-
cution (→p.73).
“CopyWholeTrk”: Copying to a V-track
Here’s how V-track “a” (=currently selected) of track 1
can be copied to V-track “b” of track 1.
1 Check the copy destination.
In the [TRACK] “Vtr1–8” tab page, check that track
1 V-track “b” is either empty or may be erased
(overwritten). After checking, be sure to re-select
“a.” (→p.52)
2 Select the Copy Whole operation.
In the [TRACK] “EditTrk” tab page, set “EditT
ype”
to “CopyWholeTrk.”
3 Select the copy source track number.
Set “Sour
ceTrack” to track “1.”
4 Select the copy destination track number.
Set “DestT
rack” to track “2.”
5 Select the copy destination V-track.
Set “DestVT
rk” to V-track “b.”
6 Execute the copy operation.
Press the “Exec.” button. The display will ask
“AreYouSure?” Press the “Yes” button to copy the
data.
When the data has been copied, the display will
indicate “Completed.” Press the “OK” button.
7 In the [TRACK] “Vtr1–8” tab page, select V-track
“b” of track 1.
Move to the beginning of the song, play back, and
check that the data has been copied correctly.
You can use Undo to return to the state before exe-
cution (→p.73). In this case, set the V-track back to
“a” for track 1.
“SwapWholeTrk”: Exchanging an entire track
Here’s how track 1 can be exchanged with V-track “a”
(=currently selected) of track 2.
1 Select the Swap Whole operation.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “SwapWholeTrk.”
2 Select the swap source track number.
Set “Sour
ceTrack” to track “1.”
3 Select the swap destination track number.
Set “DestT
rack” to track “2.”
4 Select the swap destination V-track.
Set “DestVT
rk” to V-track “a.”
5 Execute the swap operation.
Press the “Exec.” button. The display will ask “Are
YouSure?” Press the “Yes” button to swap the data.
When the data has been swapped, the display will
indicate “Completed.” Press the “OK” button.
6 Move to the beginning of the song, play back, and
check that the data has been swapped correctly.
You can use Undo to return to the state before exe-
cution (→p.73).
“SwapWholeTrk”: Exchanging V-tracks
Here’s how V-track “a” (=currently selected) of track 1
can be exchanged with V-track “b” of track 1.
1 Check the exchange destination.
In the [TRACK] “Vtr1–8” tab page, check that track
1 V-track “b” is the track that you wish to swap.
After checking, be sure to re-select “a.” (→p.52)
2 Select the Swap Whole operation.
In the [TRACK] “EditTrk” tab page, set “EditT
ype”
to “SwapWholeTrk.”
3 Select the swap source track number.
Set “Sour
ceTrack” to track “1.”
4 Select the swap destination track number.
Set “DestT
rack” to track “1.”
5 Select the swap destination V-track.
Set “DestVT
rk” to V-track “b.”
6 Execute the swap operation.
Press the “Exec.” button. The display will ask “Are
YouSure?” Press the “Yes” button to swap the data.
When the data has been swapped, the display will
indicate “Completed.” Press the “OK” button.
7 In the [TRACK] “Vtr1–8” tab page, select V-track
“b” of track 1.
Move to the beginning of the song, play back, and
check that the data has been swapped correctly.
You can use Undo to return to the state before exe-
cution (→p.73). In this case, set the V-track back to
“a” for track 1.