Filter
Top Products
70
If locations in the song have been registered to the [IN/
LOC1], [OUT/LOC2], [TO/LOC3], and [END/LOC4]
keys, you can use them to perform the following func-
tions.
• Locate point (press a key to move to the registered
time location)
• Loop playback in/out points
• In/out points for auto-punch recording
• Editing locations for track editing
• In-out playback
With this function, you can hold down the [IN/
LOC1] key and press the [OUT/LOC2] key to play-
back from the IN time registered in the [IN/LOC1]
key to the OUT time registered in the [OUT/LOC2]
key. This provides a convenient way to play back the
IN–OUT range so that you can check its contents.
Registering a locate point ([IN/LOC1],
[OUT/LOC2], [TO/LOC3], [END/LOC4])
1 Move the current time to the location that you wish
to register.
Use the counter (“Counter”) or the [FF]/[REW]
keys to move (→p.24).
2 Press the [STORE] key to store the selected time
location.
3 Register the stored time location.
Press either the [IN/LOC1], [OUT/LOC2], [TO/
LOC3], or [END/LOC4] key to register the time to
that key. Registration is completed the moment you
press the key.
You can perform steps 2 and 3 following even
during song playback/recording. The time location
at which you pressed the [STORE] key will be
stored, allowing you to register it to a locate key.
Moving to a locate point
● When you press a [IN/LOC1], [OUT/LOC2], [TO/
LOC3], or [END/LOC4] key that you registered,
you will move to the registered time location.
Locate functions
IN/LOC1:
The time location registered to the [IN/LOC1] key
is used in the following ways for the following
functions.
• Move to locate point 1
• Punch-in time for auto-punch recording
• Playback start time for loop playback
• Playback start time for in-out playback
• The following times for track editing operations
Copy source start time for “Copy Track”
Start of blank insert location for “Insert Track”
Start of erased region for “Erase Track”
Start of deleted region for “Delete Track”
Start time of swap source and swap destination
for “Swap Track”
Start of reversed region for “Reverse Track”
Start of expanded/compressed region for
“ExpCmpTrack”
OUT/LOC2:
The time location registered to the [OUT/LOC2]
key is used in the following ways for the following
functions.
• Move to locate point 2
• Punch-out time for auto-punch recording
• Playback end time for loop playback
• Playback end time for in-out playback
• The following times for track editing operations
Copy source end time for “Copy Track”
End of blank insert location for “Insert Track”
End of erased region for “Erase Track”
End of deleted region for “Delete Track”
End time of swap source and swap destination
for “Swap Track”
End of reversed region for “Reverse Track”
End of expanded/compressed region for “ExpC-
mpTrack”
TO/LOC3:
The time location registered to the [TO/LOC3] key
is used in the following ways for the following
functions.
• Move to locate point 3
• The following times for track editing operations
Copy destination time for “Copy Track”
Reverse copy destination time for “Reverse
Track”
Start time + copy destination time of expanded/
compressed data for “ExpCmpTrack”
END/LOC4:
The time location registered to the [END/LOC4]
key is used in the following ways for the following
functions.
• Move to locate point 4
• The following time for track editing operations
End time of expanded/compressed data for
“ExpCmpTrack”
10. IN/LOC1, OUT/LOC2,
TO/LOC3, END/LOC4