M-Audio GR-D347U Microphone User Manual


 
Introduction
Thank you for purchasing the Luna microphone from M-Audio.Please take a few
moments to read the following guide into order to get the maximum results
from your microphone.
Important: Please fill out and mail your warranty card for the Luna
immediately so that we may provide you with support for your microphone
(you may also register online at www.m-audio.com/register).
Features
single pattern cardioid condenser
large all-brass capsule
1.1” evaporated gold diaphragm
+/-1dB tolerance across entire frequency range
vintage sound, modern technology
Class A FET electronics
includes shock mount and hard case
Unpacking
The container for your microphone was carefully constructed for protection
during shipping. Please save this packaging for storage or traveling with your
Luna microphone. If your box does not include the following items, please
contact your dealer immediately:
1 M-Audio Luna microphone
1 hard case
1 shock mount
Care of Your Microphone
Here are a few tips for care of your Luna microphone:
•Never subject the Luna to physical shock.
•Always use the included shock mount when securing to a stand.
•Always, wipe the Luna exterior down with a soft dry cloth and return the
Luna to its case after each use to prevent damage from dust and shock.
•In the event that your Luna needs more extensive cleaning, lightly dampen a
soft cloth with water or mild household soap and clean the metal exterior
of the Luna, wiping it completely dry when finished. Never spray a cleaning
agent on the microphone itself, as the moisture can damage the unit.
•Avoid subjecting the Luna to any kind of moisture. In vocal applications,
moisture from breath condensation /saliva build-up can be prevented by use
of a windscreen.
•Never disassemble the Luna microphone. There are no user-serviceable
parts inside.
•Always use top-quality cables in order to avoid shorts that may damage the
microphones electronics.
•Avoid temperature extremes above 95°F and below 50°F.When moving the
microphone between outdoor and indoor environments, allow the
microphone to acclimate to room temperature before connection and use,
in order to avoid condensation on the diaphragm.
Connections and Phantom Power
The M-Audio Luna microphone outputs a balanced, low impedance signal. It
requires the additional signal boost acquired via connection to mic-level inputs
of a preamp or mixer channel.
As with all condenser microphones, your Luna condenser requires power in
order to operate.You will need to connect the Luna via XLR connection to a
preamp or mixer channel strip that supplies +48 volt phantom power (phantom
power shares the same XLR cable as the audio from the microphone). In order
to avoid loud pops that can damage components like speakers and microphones,
always perform the following steps (in order listed) when connecting the mic
and/or cable:
1. Turn the gain on your preamp and/or mixer all the way down
2. Make sure that phantom power is disengaged
3. Connect the microphone via a high-quality XLR cable
4. Engage phantom power
5. Turn up the gain on your preamp and/or mixer
Before disconnecting the mic and/or cable:
1. Turn the gain on your preamp and/or mixer all the way down
2. Disengage phantom power
3. Disconnect the microphone via a high-quality XLR cable
Applications
The Luna’s clean-sounding technology is combined with an all-brass capsule to
produce a smooth bottom and vintage tone that’s perfect for capturing and
enhancing great vocals.The Luna is also great for most other instruments and
applications—including amplified guitar or bass.
Cardioid Pattern
Cardioid is the most universal polar pattern found in microphones. In cardioids,
the back of the microphone rejects sound, allowing the engineer to isolate the
signal source from other performance elements or background noise.