Filter
Top Products
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
55 Hz to 2.8 kHz
Usable Low Frequency (-10 dB)
40 Hz
Power handling:
350W RMS
700W program
1400W peak
Sound Pressure Level, 1 Watt, 1
meter in anechoic environment:
101 dB SPL (2.00V input)
Transducer complement:
One classic Black Widow
®
15” woofer,
1502-8
Impedance (Z):
8 ohms
Input connections:
One 4-pin twist-lock connector, in
parallel with two 1/4" phone jacks.
Enclosure materials and finish:
12 mm Baltic birch plywood finished
in black polyurethane Hammer Head
™
finish, with a full length cloth grille
Transport provisions:
Steel handles, one on each side
Dimensions (H x W x D):
27.88” x 23.88” x 20.12”
708 mm x 607 mm x 511 mm
Net weight:
71 Lbs. (32.3 kg)
Features:
• 15” 1502-8 classic Black
Widow
®
bass woofer
• 700 watts program power
handling
• Vented cabinet for strong
powerful bass
• Baltic Birch all-plywood cabinet
• Two 1/4" input jacks, and one
4-pin twist-lock connector
• 8 ohm impedance
• Durable black polyurethane
Hammer Head
™
finish
• Classic black grille cloth and
silver piping trim
• Made In USA
Description:
The new VB
™
series was designed
from the ground up for the serious
professional bass player. Voiced for
strong bass with a smooth harmonic
tone, the versatility and performance
of the VB
™
115 encourages use with
any fine bass amp head.
The VB
™
115 is constructed using a
premium grade of 12 mm Baltic Birch
plywood with extensive internal
bracing, and is covered with durable
polyurethane Hammer Head™ finish.
The cabinet includes a black cloth
grille with a wooden plywood frame
for that warm musical “tone”.
The 15” Black Widow
®
bass woofer
provides a classic bass tone, with
excellent power handling and
punch. The vented cabinet provides
strong powerful bass, with every
note propelled forward into the
mix. Inputs include two 1/4" input
phone jacks, and one 4-pin twist-lock
connector for maximum flexibility.
With a nominal impedance of 8 ohm,
and a power handling of 700 watts
program and 1400 watts peak, the
VB
™
115 can be used in conjunction
with almost any sized bass amp
head. Be sure to check the amplifier
specifications to verify the minimum
impedance rating of the amp used to
power the VB
™
115.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty
statement. Copies of this statement
may be obtained by contacting Peavey
Electronics Corporation, P.O. Box 2898,
Meridian, Mississippi 39301-2898, or
on our website at http://www.peavey.
com/support/warrantyregistration/
warrantytext.cfm.
Peavey Electronics Corporation • 5022
Hartley Peavey Drive • Meridian, MS • 39305
(601) 483-5365 • FAX (601) 486-1278
www.peavey.com ©2010 80305249
SPECIFICATIONS VB
™
115 Bass Cabinet
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005