Filter
Top Products
The patent FLS Feedback Locating System is a quick and easy way to removing feedback from the system. When
feedback occurs, the LED that corresponds to the frequency band causing feedback will illuminate over the slider
to be adjusted. Slowly bring that slider down until feedback is gone. The LED will remain illuminated for a few
seconds after the feedback is gone. It is normal for the lights to occasionally turn on during a performance. This
does not necessarily mean feedback is occurring.
These 5-band EQs are designed for 12dB cut or boost. These EQs are used to make minor adjustments to the
overall mix and should be used sparingly.
These LEDs indicate the signal level going to the power amplifier. The top LED indicates LIMIT and activation of
our revolutionary DDT
™
speaker protection circuit, which is built into the PV 5300 and activates automatically to
maximize the power amplifier without fear of distortion.
The master level control for the main mix and the overall volume of the powered mixer.