Filter
Top Products
®
RMA429
Rack Mount Kit
Installation/Operation
Manual C979M (1/93)
1.0 WARNINGS
Prior to installation and use of this product, the following
WARNINGS should be observed.
1. Installation and servicing should only be done by
Qualified Service Personnel and conform to all
Local codes.
2. Unless the unit is specifically marked as a NEMA
Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is
designed for indoor use only and it must not be
installed where exposed to rain and moisture.
3. Use only installation methods and materials capable
of supporting four (4) times the maximum specified
load.
4. Only use replacement parts recommended by Pelco.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.
Pelco • 300 W. Pontiac Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-209) 292-1981
FAX (800) 289-9150 or (1-209) 292-3827 • DataFAX (800) 289-9108 or (1-209) 292-0435
International customers call (1-209) 292-1981 or FAX (1-209) 348-1120
2.0 SCOPE
The information within this manual covers the installa-
tion of the RMA429 Rack Mount Kit.
3.0 DESCRIPTION
The RMA429 Rack Mount Kit is designed to provide
rack mounting for single or dual Sanyo VM4509 and
HR4512 9" (22.86 cm) monitors.
This versatile rack will fit any standard 19 inch
(48.26 cm) wide console or rack configuration.