Filter
Top Products
OWNER’S MANUAL — Please read before using this equipment.
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Unidirectional Dynamic Microphone for Vocals
The RadioShack Unidirectional Dynamic Mi-
crophone for Vocals is a high-quality unidi-
rectional microphone that provides the
performance you need for your public ad-
dress (PA) or recording system. Its direction-
al pickup pattern allows greater distances
between the microphone and the sound
source, while reducing unwanted sounds
and feedback.
Other features include:
Wire-Mesh Windscreen
— cuts down on
wind noise and breath pops.
Built-In On/Off Switch
— for convenient
control of the microphone.
XLR-Type Connector
— for balanced low-
impedance applications.
INTERNAL CONNECTIONS
FREQUENCY RESPONSE
CURVE
SPECIFICATIONS
Type ....................................................... Dynamic
Directivity ....................................... Unidirectional
Impedance ...................... 600 Ohms (at 1000 Hz)
Sensitivity (at 1 kHz) ..................... –74 dB ± 3 dB
(0 dB = 1V Microbar)
Frequency Response ................... 100–10,000 Hz
Cable ................................ 20 Feet (6 m) Length ×
3
/
16
Inch (5 mm) Diameter
Plug ..........................
1
/
4
Inch (6.35 mm) Diameter
Phone Plug at One End,
XLR-Type Connector at the Other End
Case .............................................................. Zinc
Accessories ............................ Microphone Holder
Weight, Including Cable ............... 18.3 oz (517 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and im-
provement without notice.
Overall Dimensions
3-Pin
Cannon
Plug
Mic
1
/
4
Inch (6.35 mm)
Diameter Plug
3-Pin
Cannon
Socket
On Off
Relative Response in dB
Frequency in Hertz (Hz)
2
1
/
8
Inches (54 mm)
2
1
/
16
Inches
(52.5 mm)
6
1
/
2
Inches
(165 mm)
9
3
/
8
Inches
(238 mm)