Filter
Top Products
21
Before You Play
Once the connections have been completed (p. 19), turn
on power to your various devices in the order specified.
By turning on devices in the wrong order, you risk
causing malfunction and/or damage to speakers and
other devices.
Turning the Power On
1.
Turn the [Volume] knob all the way toward the left
to minimize the volume.
fig.VolumeMin-j.eps_88
2.
Press the [Power] switch.
fig.PowerOn.eps_88
The power will turn on, and the [Piano] and [Reverb] buttons
will light.
After a brief interval, you’ll be able to produce sounds by
playing the keyboard.
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required
before the unit will operate normally.
3.
Use the [Volume] knob to adjust the volume.
Turning the Power Off
1.
Turn the [Volume] knob all the way toward the left
to minimize the volume.
fig.VolumeMin-j.eps_88
2.
Press the [Power] switch.
fig.PowerOff.eps_88
The screen goes blank and the power is turned off.
Here’s how to adjust the volume of your keyboard playing or
the playback volume of an internal song.
If headphones are connected, use the [VOLUME] knob to
adjust the headphone volume.
1.
Turn the [VOLUME] knob to adjust the overall
volume.
Adjust the volume while you play the keyboard to produce
sound.
Turning the knob toward the right will increase the volume,
and turning it toward the left will decrease the volume.
fig.VolMinMax.eps_88
Turning the Power On/Off
Lower position
ON
Adjusting the Sound’s Volume
OFF
Upward position
Decrease Increase
F-110_r_e.book 21 ページ ２００９年６月３０日 火曜日 午後１２時６分