Filter
Top Products
24
Performing
The F-110 features over 300 different internal sounds,
allowing you to enjoy performing with sounds suitable for
many different types of music.
These onboard sounds are called “Tones.” The Tones are
divided into 4 different groups, each of which is assigned to a
different Tone button.
The Tone “Grand Piano 1” is selected when the instrument’s
power is turned on.
fig.SoundSelect.eps_88
1.
Press a Tone button to select a tone group.
You’ll hear the Tone assigned to Tone number 1 in the
selected Tone Group. Play a few notes on the keyboard.
The display will indicate the number of the currently selected
tone.
fig.d-1.eps_88
2.
Use the [–] [+] buttons to select a sound from the
tone group.
The Tone you’ve selected is heard when you finger the
keyboard.
The next time you select this Tone button, you’ll hear the
tone you selected here.
fig.d-5.eps_88
If you don’t perform any operation for a while, the
indication in the display will change to the following.
fig.nanimo.eps_88
About the Tone, refer to “Tone List” (p. 69).
For some sounds, there are keys that do not produce
sound.
You can change the touch sensitivity, or response of the keys.
You can adjust the keyboard touch as appropriate for the
playing strength of the person who is performing.
fig.KeyTouch.eps_88
1.
Hold down the [Transpose] button and press the
[Split] button.
The display now shows the current Key Touch setting.
2.
Keep holding [Transpose] and [Split] and press the
[–] or [+] button to select the keyboard touch.
fig.d–M-.eps_88
Performing with a Variety of
Sounds
Adjusting the Keyboard
Sensitivity (Key Touch)
Message
Description
Fixed
The sound plays at one set volume, regardless of
the force used to play the keys.
Super Light
This setting produces the lightest keyboard
touch.
Light
You can achieve fortissimo (ff) play with a less
forceful touch than “medium,” so the keyboard
feels lighter. This setting makes it easy to play,
even for children.
Disabling the panel buttons
By using the Panel Lock function you can disable all of
the buttons. This allows you to prevent unintended
changes in the settings during a performance. For
details, refer to “Disabling the Buttons (Panel Lock)”
(p. 61).
F-110_r_e.book 24 ページ ２００９年６月３０日 火曜日 午後１２時６分