Filter
Top Products
33
Playing Back Songs
Here’s how to repeatedly play all internal songs in succession.
fig.PlusMinPlaySong.eps_88
1.
Press the [Song] button a number of times until the
indication “USr” (or a number preceded by a “P” or
“U”) is displayed.
2.
Use the [–] [+] buttons to select the song and
memory area (“P” or “U”) where you want playback
to start.
3.
While holding down the [Song] button, press the
[
] button.
The display will indicate “ALL,” and the songs will play
consecutively, starting with the selected song.
When the last song finishes playing, playback will return to
the first song and then continue.
fig.d-ALL.eps_88
The songs in the selected memory area will play
consecutively.
4.
To stop playback, press the [ ] button so its
indicator is turned off.
After you’ve pressed the [
] button to stop
playback, pressing the [ ] button once again will
resume playback from the location where you stopped,
but the next song will not play back. If you want to play
back all songs once again, hold down the [Song] button
and press the [ ] button.
See “Internal Song List” (p. 75) for the names of the
internal songs.
When playing back internal preset songs or songs from
internal memory, you can select the performance parts that
will play.
You can also practice each hand separately while playing
along with the song.
fig.TrackSelectz.eps_88
1.
Select the song that you want to play (p. 32).
2.
Press the [
] button to play the song.
3.
Keep holding the [
] button and select the
part that you don’t want to play back.
Press the [E. Piano], [Strings] or [Others] button.
The button you pressed will go out, and the assigned part
(see above) will no longer be heard.
If you want to practice the right-hand part, hold down
the [
] button and press [Others] to turn it off.
When you play back the song, the right-hand part will
not play.
You can select the part that will be muted when you
press the [E. Piano] button and turn off its light. Please
refer to p. 56.
Playing Back All Songs
Continuously (All Song Play)
Listening to Each Part
Separately
The performance data is assigned to the Track buttons
as shown below.
fig.TrackButtonz.eps_88
The left-hand performance is assigned to the [Strings]
button, the right-hand performance is assigned to the
[Others] button, and other performance is assigned to
the [E. Piano] button. “Tracks” are areas in which music
data is held.
Right-hand
Part
Accompaniment
Part
Left-hand Part
F-110_r_e.book 33 ページ ２００９年６月３０日 火曜日 午後１２時６分