Roland F-110 Electronic Keyboard User Manual


 
37
Recording
Starting Recording
5.
Press the [
] button or play the keyboard.
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard
(without pressing the [ ] button). In this case, a count
is not sounded.
When recording begins, the [ ] button and [ ]
button will light.
During the count-in, the measure is indicated in the
display as “-2” then “-1.”
Stopping Recording
6.
Press the [
] button.
Recording will stop. You can also press the [
] button to
stop recording.
Listening to the Recorded Performance
7.
If the indication “Usr.” is not displayed, press the
[Song] button repeatedly until it appears.
8.
Press the [–] button.
You will return to the beginning of the performance you
recorded.
9.
Press the [
] button.
The recorded performance will play back.
If you press the [
] button while the metronome
is sounding, there will be a two-measure count (“count-
in”) before playback begins.
10.
Press the [
] button once again to stop
playback.
The recorded performance will disappear when you
turn off the power. If you want to keep the performance
you recorded, you must save it in internal memory.
Refer to p. 41.
If you have not saved the performance you recorded,
you won’t be able to play back another song. You’ll have
to erase (p. 40) or save (p. 41) the performance before
playing back another song.
The F-110’s recorder has three tracks. You can record the
performance of each hand separately to different track
buttons (for example, the left-hand performance to the
[Strings] button and the right-hand performance to the
[Others] button), or you can re-record just a specific track of a
previously recorded performance.
Furthermore, you select the accompaniment track using the
[E. Piano] button.
fig.RECSep.eps_88
Recording Your Performance
Separately for Each Hand
How the track buttons correspond to the
recorded performances
The recorded performances are assigned to the track
buttons as follows.
Twin Piano (p. 50), Split mode (p. 28)
Normal performance (the entire keyboard plays a
single tone), Dual performance (p. 27)
When you record with just one recording track
specified
The performance will be recorded on the specified track.
When you record with multiple recording tracks
specified
Recording will take place in this order of priority:
[Others] button [Strings] button [E. Piano] button.
Button
Recorded performance
Twin Piano Split performance
[Others] Right section Right-hand tone
[Strings] Left section Left-hand tone
F-110_r_e.book 37 ページ 2009年6月30日 火曜日 午後12時6分