Filter
Top Products
39
Recording
Listening to the Recorded Performance
12.
If the indication “Usr.” is not displayed, press the
[Song] button repeatedly until it appears.
13.
Press the [–] button.
You will return to the beginning of the recorded
performance.
14.
Press the [
] button.
The recorded performance will play back.
15.
When you press the [
] button once again,
playback will stop.
The recorded performance will disappear when you
turn off the power. If you want to keep the performance
you recorded, you must save it in internal memory.
Refer to “Saving Songs” (p. 41).
If you have not saved the performance you recorded,
you won’t be able to play back another song. You’ll have
to erase (p. 40) or save (p. 41) the performance before
playing back another song.
Here’s how you can play along with an internal memory song
and record your performance.
For example, you can listen to the left-hand part while you
record the right-hand part.
The performance you play on the keyboard will be recorded
in place of the sound of the part you select using the track
buttons.
fig.RecordWorks.eps_88
The sound of the track button you selected will not be
heard during recording.
Performance Settings
1.
Select a song.
For details on how to select a song, refer to “Playing Back
Songs” (p. 32).
2.
Select the Tone to be played (p. 24).
3.
Specify the recording tempo (p. 34).
The performance will be recorded at the tempo of the
song you selected when recording. If you record your
playing along with a song, it will be recorded with the
time signature of that song.
Settings for Recording
4.
Press the [
] button.
5.
Hold down the [
] button and press the button
of the track you want to record, making it flash.
This allows you to record while listening to the selected song.
The [ ] button will light, the [ ] button will flash,
and the F-110 will enter recording standby mode.
If you decide not to record, press the [ ] button once
again.
How performance parts correspond with track
buttons
Starting Recording
6.
Press the [
] button.
After a two-measure count, recording will begin.
Even if you don’t press the [ ] button, recording will
begin when you play the keyboard. In this case, a count won’t
be sounded.
When recording begins, the [ ] button and [ ]
button will light.
During the count, the display will indicate the measure
number as “-2” and “-1.”
Recording Your Playing Along
with a Song
Button
Performance part
[E. Piano]
Performance data other than the right-hand
part and left-hand part
[Strings]
Left-hand part
[Others]
Right-hand part
F-110_r_e.book 39 ページ ２００９年６月３０日 火曜日 午後１２時６分