Filter
Top Products
41
Saving Your Performance
A song you’ve recorded can be saved in internal memory.
The songs you record will be lost if you simply turn off the
F-110’s power before they’ve been saved. You’ll need to save
a song if you want to keep it.
fig.SaveButtonz.eps_88
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc,” and you’ll be in Function
mode.
fig.d-Fnc.eps_88
2.
Hold down the [Song] button and use the [–] [+]
buttons to make the display indicate “SAv.”
When you take your finger off the button, the following
message will appear and the [
] button will flash.
fig.d-U01.eps_88
The number that appears in the display always refers to the
first empty User memory and may differ from the one shown
in the illustration.
3.
Use the [–] [+] buttons to select the save-
destination number.
If the dot in the lower right of the display is lit, a song has
already been saved at that number.
Select a number at which no song has been saved. If you
want to erase an unwanted song and replace it with the
newly saved song, select the number of the unwanted song.
fig.d-SongExist-e.eps_88
Saving the Song
4.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and
[
] button will flash.
fig.d-Sur.eps_88
If you decide not to save the song, press the [
]
button.
5.
Press the [
] button.
The song will be saved.
fig.d-SAv.eps_88
Never turn off the power while “SAv” is blinking in the
display.
6.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Saving Songs
Lights if a song
has been saved
F-110_r_e.book 41 ページ ２００９年６月３０日 火曜日 午後１２時６分