Filter
Top Products
44
Various Settings
In Function mode you can make various settings for
performance and recording.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
fig.F-110Function.eps_88
The [Reverb] button and [Transpose] button will light.
The display will indicate “Fnc” and you’ll be in Function
mode.
fig.d-Fnc.eps_88
2.
Press one of the blinking buttons to select the
setting you want to change.
The display shows the name of the setting while you hold
down the button. The value of the setting will appear when
you release the button.
3.
Use the [–] [+] buttons to change the setting.
4.
If you want to change a different setting, select the
setting you want to change by pressing one of the
buttons that were blinking before step 2.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
The button indicators will return to their former state.
The settings you change will return to their original
state when you turn off the power. If you want your
changes to be retained even after the power has been
turned off, carry out the Memory Backup procedure
(p. 59) to save the settings.
Basic Operation in Function
Mode
Button Function Page
[Split]
(& [–] [+])
Dual Balance
p. 48
Octave Shift
p. 49
[Piano]
(& [–] [+])
Twin Piano Mode
p. 50
Master Tuning
p. 52
Temperament
p. 52
Tonic
p. 53
Stretched Tuning
p. 53
Damper Resonance
p. 54
String Resonance
p. 54
Key Off Resonance
p. 54
[E. Piano]
(& [–] [+])
3D Sound Control
p. 45
3D Mode
p. 46
Dynamics Sound Control
p. 47
EQ Low
p. 46
EQ Medium
p. 46
EQ High
p. 46
Master Gain
p. 47
F-110_r_e.book 44 ページ ２００９年６月３０日 火曜日 午後１２時６分