Filter
Top Products
46
Various Settings
4.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Turning off 3D Sound Control
1.
Repeat steps (1)–(3) above, but select “OFF” this
time.
2.
Press the [Reverb] or [Transpose] button to leave
Function mode.
This specifies how 3D Sound Control (p. 45) is to be applied.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [E. Piano] button and use the [–]
or [+] button to select “3dM.”
3.
Release the [E. Piano] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
If required, you can increase or decrease the level of the bass,
medium and high frequencies over a range of –12 through
+12dB.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [E. Piano] button and use the [–]
or [+] button to select one of the following options:
3.
Release the [E. Piano] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
You can select a value between “-12” and “12” dB. Negative
values decrease the level of the frequency band in question,
while positive values boost it.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Changing how 3D Sound Control is
Applied (3D Mode)
Setting
Explanation
Auto
When headphones are connected, the 3D
effect is optimized for headphones, and
when no headphones are connected, the
optimal effect for speakers is applied.
Speaker
The 3D effect is optimized for speakers,
regardless of whether or not headphones are
connected.
3D Sound Control is also applied to the
sound output from the Output connectors,
making this convenient when you want to
play through speakers connected to the
Output connectors.
Headphones
The optimal effect for headphones is used,
regardless of whether or not headphones are
connected.
Changing the F-110’s Frequency
Response (Equalizer)
Setting Explanation
Level of the low frequencies (bass).
Level of the middle frequencies.
Level of the high frequencies (treble).
F-110_r_e.book 46 ページ ２００９年６月３０日 火曜日 午後１２時６分