Filter
Top Products
51
Various Settings
When you press the damper pedal during Dual performance
or Split performance, the damper pedal effect is normally
applied to both tones, but you can also select the tone to
which the effect is to be applied.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Strings] button and use the [–]
or [+] button to select “dPr.”
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
When you turn on the power, the left pedal functions as the
soft pedal, and the center pedal functions as the sostenuto
pedal (p. 22).
You can change the function of the pedal to a variety of other
operations.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Hold down the [Strings] button and use the [–] [+]
buttons to select the pedal whose function you
want to change.
: Center Pedal
: Left Pedal
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Pedal Settings
Changing How the Damper Pedal is
Applied (Damper Pedal Part)
Setting Explanation
All enabled
Applied only to Tone 1 (in dual mode)/Right-
hand Tone (in split mode)
Applied only to Tone 2 (in dual mode)/Left-
hand Tone (in split mode)
Changing How the Pedals Work
(Center/Left Pedal Function)
Setting
Explanation
Sostenuto
Sets function to sostenuto pedal.
(Selectable only for the center pedal)
Soft
Sets function to soft pedal.
(Selectable only for the left pedal)
Effects Switch
Effects can be switched on/off by pressing
the pedal.
When using the rotary effect, you can control
the speed of rotation.
* The most appropriate type of effect is
specified for each sound.
Play/Stop
The pedal will have the same function as the
[
] button.
Layer
Pressing the pedal will layer on Tone 2, used
for Dual performance.
* The Dual function can be applied only
when using Dual play.
Octave
Pressing the pedal will layer on a sound one
octave higher.
* The Octave function cannot be applied
while using Twin Piano, Dual play, or Split
play.
F-110_r_e.book 51 ページ ２００９年６月３０日 火曜日 午後１２時６分