Filter
Top Products
55
Various Settings
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
A “count-down” is when a count is sounded at the end of the
song’s introduction (before you begin playing the keyboard).
If you will be playing along with the song, sounding a count
will help you match the timing of your playing with the song.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Metronome] button and use
the [–] or [+] button to select “Ctd.”
3.
Release the [Metronome] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Specifies the part that will determine the beginning of the
performance when adding a count-down.
The count will sound before the selected part begins playing.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Metronome] button and use
the [–] or [+] button to select “Cd.P.”
3.
Release the [Metronome] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
When you select another song, this setting will return to
“r - L.”
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Setting
Explanation
OFF, 1–10
The volume of the Key Off sound decreases
as the value is lowered, while raising the
value increases the volume of the Key Off
sound.
The Key Off Resonance function is not active
when the value is set to “OFF.”
Count-down Setting
Sounding a Count Before the Melody
Begins (Countdown)
Setting
Explanation
A count is sounded
A count is not sounded
Selecting the Part that Will Begin the
Count-down (Countdown Part)
Setting
Explanation
Right-hand and left-hand parts of a song
Left-hand part of a song
Right-hand part of a song
1–16
Part 1–16
F-110_r_e.book 55 ページ ２００９年６月３０日 火曜日 午後１２時６分