Filter
Top Products
59
Various Settings
Connecting the F-110 to a V-LINK compatible image device
allows you to control the images with the F-110.
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
V-LINK
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to
the expressive elements of a music performance.
How to Use the V-LINK
1.
Hold down the [Song] button and press the
[Metronome] button.
The display will indicate “_._._” if the V-LINK function is on, or
“. .” it is off. Repeat this step to select “_._._”, if necessary.
2.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
3.
Press and hold the [Others] button and use the [–]
or [+] button to select “vLn.”
4.
Release the [Others] button to see the current
setting.
5.
Use the [–] [+] buttons to set the desired MIDI
channel
.
6.
Press the [Reverb] or [Transpose] button to leave
Function mode.
The button’s indicator will return to its previous state.
If V-LINK is on, the bars at the bottom of the display will be lit.
fig.d-VLinkOn.eps_88
You can control images using the twelve keys at the left end
of the keyboard.
fig.V-LINK-Keyboard.eps_88
While V-LINK is switched on, no sound is produced
when you press any of the twelve keys at the left end of
the keyboard.
7.
To disengage V-LINK, hold down the [Song] button
and press the [Metronome] button to select “ . . .”
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However,
you can specify that the various settings will be remembered
even when the power is turned off.
This function is called “Memory Backup.”
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
Other Settings
Using the V-LINK Function (V-LINK)
Settings (V-LINK Channel)
1–16
Remembering the Settings
(Memory Backup)
C1 D1 E1 F1 G1A0
A0 – G1#
B0
F-110_r_e.book 59 ページ ２００９年６月３０日 火曜日 午後１２時６分