Filter
Top Products
26
Adding Variety to Your Performances
Playing Different Sounds in the Right and Left Hand
(Split)
Dividing the keyboard into right-hand and left-hand areas, then playing different sounds in each is
called “split performance.” The boundary key is called the “split point.”
fig.splitpoint.e
* The split point key is included in the left-hand keyboard area.
fig.panel2-3
1
Press the [Split] button.
The button’s indicator will light.
The tone on the right will be the “Right-hand Tone,” and the tone on the left will be the “Left-hand
Tone.”
fig.split.e
When the “Right-hand Tone” or “Left-hand Tone” are highlighted, you can use the [Tone] buttons and
the [ ] or [ ] button to select tones.
When the “Split Point” is selected, you can press the [ ] or [ ] button to change the split point.
The split point can also be set by holding down the [Split] button and pressing the key for the desired
split point.
To cancel split performance, press the [Split] button, getting its indicator to go dark.
Split Point (set to F 3, when the power is turned on.)
C1 D1 E1 F1 G1 A1 B1A0 B0 C2 C3 C4 C5 C8B7
…
Left-hand Tone Right-hand Tone
1
Split Point
Displays the key between the
right-hand and left-hand
keyboard areas.
Left-hand Tone
Displays the name of the tone
selected for the left-hand
keyboard area.
Right-hand Tone
Displays the name of the tone
selected for the right-hand
keyboard area.
Change the tone,
change the Split Point
Return to the
previous screen
Select the item to set
The selected item will be
highlighted in white.
HPi-5_e.book 26 ページ ２００４年１２月２１日 火曜日 午後１２時４６分