Filter
Top Products
SVMi E-Series
Unlike traditional PC based Voice Mail / Auto Attendant Systems, the SVMi E-Series installs inside the telephone
equipment and operates as an integral part of it. This is referred to as "In-Skin" and makes the SVMi E-Series pro-
prietary to the Samsung family of Phones Systems.
SVMi-2E
The components parts of the SVMi-2E are as follows:
Main Board (Mother Board - PCB)
This is a self contained voice mail system on a plug in card designed to
work exclusively with the iDCS 16 KSU 2.
The Serial Interface
The connector is called the SIO connector and can be used to connect a
modem or PC to provide local or remote PC based administration. The
use of this connector is optional and it is not necessary to have anything
connected in order for the SVMi-2E to process calls.
Reset Button
The white button located on the component side of the PCB to the left
of the SIO is the reset button. Pressing this will immediately restart the
SVMi-2E system and will disconnect any calls in progress.
NOTE: Since pressing the RESET button during operation will disconnect
all callers and immediately restart the SVMi-2E, it should only be used as
directed. Pressing this button when the system is performing Disk I/O
could result in data loss or file corruption. This button should not be pressed if the SVMi-2E is actively processing
calls.
i-Button (Optional)
The i-Button (a.k.a. upgrade key) is a small hardware device installed in the
SVMi-2E i-Button Socket. It provides the license for two additional ports
increasing the number of available ports from 2 to 4, and the number of
mailboxes from 25 to 100.
The 2 port i-Button for the SVMi-2E card is available only from SAMSUNG.
NOTE: The SVMi-2E i-Button is proprietary to the SVMi-2E ONLY. It can NOT
be used on any other SVM/SVMi E or non-E Series Products.
Hardware Description
2.3