Filter
Top Products
2
Hardware Description
SVM-400E
The SVM-400 is a PC based Voice Mail System. All PC com-
ponents were reduced in size and contained into a small
housing. But, unlike traditional PC based Voice Mail / Auto
Attendant Systems, the SVM-400E has no moving parts. This
adds to the robustness and reliability. All the custom speech
prompts and callers messages are stored in digital form on
static memory. This memory can be faster and more reliable
than conventional disk drives.
The component parts of the SVM-400E are as follows:
Main System (Mother Board - PCB)
This is a self contained voice mail system designed to work exclusively with the iDCS 16. The SVM-400E works
with both the original iDCS 16 KSU and the new KSU2.
Power Supply
Since this is a self contained voice mail system it contains it's own internal Power Supply that uses a standard PC
AC Power Cord for connectivity to a standard 110V/60Hz AC outlet. The On/Off switch is built onto the Power
Supply. The On/Off switch must be in the ON position for normal system operation. Turning the Power Switch
OFF will immediately disconnect any callers connected to the SVM-400E.
NOTE: Since pushing the Power Switch to the OFF position during operation will disconnect all callers and imme-
diately turn off the SVM-400E, it should only be used as directed. Pressing this switch when the system is per-
forming Disk I/O could result in data loss or file corruption. This switch should not be pressed if the SVM-400E is
actively processing calls.
DLI1 and DLI2 Connectors
These connectors are used to connect the SVM-400E to the iDCS 16's last two Digital Line Ports. The SVM-400E
works with both the original iDCS 16 KSU and the new KSU2.
Unmarked Connectors
These connectors are next to the two DLI connectors and are not used at this time.
2.1