Tascam D00871320A Recording Equipment User Manual


 
Starting out with your DP-01
TASCAM DP-01 Owner’s Manual 11
Startup & shutdown
Startup & shutdown
Read this section to understand how to power up and power down
the DP-01.
When switching the
DP-01 on and off,
we suggest that you turn down the
volume of any speakers or amplifi-
ers connected to the unit. Also, do
not wear headphones connected to
the DP-01 when switching power
on or off. This will avoid damage to
speakers, etc. and possible dam-
age to your hearing.
Starting up the DP-01
With the DP01’s rear panel power switch OFF, connect the power adaptor
to the DP01, the power cable to the power adaptor, and the power cable to
the power supply.
Switch on the DP-01 using the rear panel switch.
The DP-01 display shows a welcome message.
The system is loaded, and the last saved song is then loaded. The
ACCESS indicator lights to show the hard disk is in use while the song
is being loaded, and the display shows the current operation.
You can reach this
screen from most
operations by repeatedly pressing
the
EXIT
key.
When the ACCESS light goes off, the display shows the “home
screen”:
Figure 1.1: Power connections to the DP-01
DP-01_OM_E.book 11 ページ 2005年6月13日 月曜日 午後7時14分