Tascam D00871320A Recording Equipment User Manual


 
Advanced techniques
TASCAM DP-01 Owner’s Manual 39
Working in bars & beats
2 Select the GENERATOR action and press the key:
3 Use the jog wheel to change the OFF setting to CLK (clock).
The DP-01 now sends the messages described here from MIDI OUT
when playing back or recording. Connect the MIDI OUT of the DP-01
to the MIDI IN of your MIDI instrument.
Consult the documentation of the MIDI instrument for details of how
to synchronize to MIDI Clock, etc. messages as a slave.
MIDI timecode
MIDI Timecode sends out the current position in hours, minutes,
seconds and frames through the MIDI OUT port. Typically, you will
use the timecode function with devices such as recorders and Digital
Audio Workstations (DAWs) that work to a time base, rather than a
bars and beats base.
1 Press MENU and scroll down to MIDI and press the key.
2 Select the GENERATOR action and press the key:
3 Use the jog wheel to change the OFF setting to MTC (MIDI Timecode).
The DP-01’s MIDI
Timecode is fixed
at a frame rate of 30 fps and cannot
be changed.
The DP-01 now sends timecode from MIDI OUT when playing back or
recording. Connect the
MIDI OUT of the DP-01 to the MIDI IN of
your MIDI device.
Consult the documentation of the MIDI device for details of how to
synchronize to MIDI Timecode as a slave.
When "OFF" is selected at "Output" The metronome function is
disabled, and no items other than Output are displayed.
DP-01_OM_E.book 39 ページ 2005年6月13日 月曜日 午後7時14分