Filter
Top Products
40
TASCAM DP-006
4 – Preparations
Preparing the power
This unit can be powered either by 4 AA batteries or using a TASCAM PS-P520
AC adaptor (sold separately).
Alkaline or NiMH AA batteries can be used with this unit.
8
Using batteries
Open the cover of the battery case on the bottom of the unit has described in
“Inserting an SD card” on the previous page. Insert 4 AA batteries in the box
according to the ¥ and ^ indications.
CAUTION
•
Manganese AA batteries cannot be used with this unit.
•
This unit cannot charge nickel-metal hydride batteries. Use a commer-
cially-available recharger.
•
The included alkaline batteries are for confirming the operation of the unit
and might not last very long.
•
Remove the batteries if you do not plan to use the unit for some time.
Leaving the batteries in could cause them to be used gradually and lose
their charge or even to leak.
8
Using an AC adaptor (sold separately)
Connect a TASCAM PS-P520 AC adaptor (sold separately) to the DC IN 5V
connector as shown in the illustration.
DC plug
AC wall socket
TASCAM
PS-P520
(sold separately)
CAUTION
•
Use only the PS-P520 AC adaptor (sold separately). Using any other AC
adaptor could cause malfunction, fire or electric shock.
•
This unit can be powered by batteries or an AC adaptor. Power cannot be
supplied to this unit over USB.
NOTE
The adapter powers the unit if the adapter is connected even if batteries
are installed.