Filter
Top Products
80
TASCAM DP-006
11 – SD Card Management
SD card capacity and partition size
SD card capacity FAT partition size MTR partition size
32GB 4GB 2GB, 4GB, 8GB or 16GB
16GB 4GB 2GB, 4GB or 8GB
8GB 2GB 2GB or 4GB
4GB 2GB 2GB fixed
2GB 1GB 1GB fixed
1GB 512MB 512MB fixed
512MB 256MB 256MB fixed
NOTE
•
The unit can handle a maximum of 4 MTR partitions, no matter how small
you make them.
•
When you insert an unformatted SD card, the unit will ask you to format
it. At this time, however, you cannot choose the size of the MTR partitions.
If you want to change the sizes, follow the procedures above to format the
card.
4. If the capacity of the SD card is 8 GB or less, press the F2 [EXEC] button.
If the capacity of the SD card is more than 8 GB, use the DATA wheel to
set the size of the MTR partition, and press the F2 [EXEC] button.
A pop-up message warning that all songs will be erased appears.
5. Press the F3 [YES] button to format the SD card.
For example, if you format a 16 GB SD card with 4GB MTR partitions, 12
GB are left for MTR partitions after 4 GB is used for the FAT partition. Three
partitions are created. Two are 4 GB and the last one is 3 GB. (Since 1GB is
actually 1024 MB, the total size of the partitions does not always match
the SD card size.)
NOTE
•
When formatting finishes the
CARD
menu screen reopens.
•
After formatting, one song is automatically created in each MTR partition.
•
To cancel formatting, press the F4 [NO] button.