Filter
Top Products
SCPI Commands for the Counter
3–64
VX4101A MultiPaq Instrument User Manual
CONFigure[1|2|3]([:SCALar]|:ARRay)
:FREQuency [<array size>[,<expected value>[,resolution>]]]
:FREQuency:RATio [<array size>[,<expected
value>[,resolution>]]]
:PERiod [<array size>[,<expected value>[,resolution>]]]
CONFigure[1|2]([:SCALar]|:ARRay)
:NDUTy cycle|PDUTCycle|DCYCle [<array size>[,<dcycle
reference>[,<expected value>[,resolution>]]]
:NWIDth|PWIDth [<array size>[,<pwidth reference>[,<expected
value>[,resolution>]]]
:PHASe [<array size>[,<expected value>[,resolution>]]]
:RTIMe|FTIMe|RISE:TIME|FALL:TIME [<array size>[,<low
reference>[,<high reference> [,<expected
value>[,resolution>]]]
:TINTerval [<array size>[,<expected value>[,resolution>]]]
[:VOLTage]
:AC [<array size>[,<expected value>[,resolution>]]]
:DC [<array size>[,<expected value>[,resolution>]]]
:MINimum [<array size>[,<expected value>[,resolution>]]]
:MAXimum [<array size>[,<expected value>[,resolution>]]]
:PTPeak [<array size>[,<expected value>[,resolution>]]]
CONFigure[1|2|11|12|21|22]([:SCALar]|:ARRay)
:TINTerval:DELay:TIME|EVENts [<array size>[,<delay
time>|<delay events>[,<expected value>[,resolution>]]]
CONFigure[1|2|10|20]([:SCALar]|:ARRay)
:TOTalize
NOTE. If you specify SCALar in the command, <array size> is not a valid
parameter. If ARRay is specified, <array size> is a required parameter.
CONFigure?
Command Syntax
Query Syntax