Wharfedale DM 3.0 Microphone User Manual


 
DM3.0 & DM3.0S
The frequency response curve shown above (measuring
tolerance at +3dB) and polar pattern correspond to
typical production run specifications for this microphone.
Frequency Response
Supercardioid Dynamic Microphone
Wharfedale International Ltd.
IAG House, Sovereign Court,Ermine Business Park, Huntingdon, Cambs P E29 6XU, England
Tel: +44(0)1480 447700 Fax: +44 (0)1480 431767
www.wharfedale.co.uk
The DM3.0 is a dynamic moving coil microphone
designed to handle a wide variety of vocal and
instrument applications for both live sound and
recording. This microphone is also available with an
integral on/off switch (model DM3.0S). Characteristics
of the DM3.0, such as a wide supercardioid pickup
pattern with a frequency response of 50Hz-18KHz ,
slight bass proximity and mid range presence result in
a warm and natural response for nearly every type of
voice. The DM3.0 is engineered to handle very high
levels of gain without distortion and will provide over
25dB of off axis feedback rejection.
Low impedance and balanced output allow
interference free performance even with long cable
runs. The DM3.0 is built solidly with a cast zinc alloy
body, steel mesh grille ball and internal pop screen.
APPLICATIONS
Live Stage
Club, House of Worship, Gospel, Corporate
Presentation, Karaoke
Instruments
Electric Guitar, snare, toms, brass, congas, flute
Home Studio
Vocal and instrument applications
FEATURES
All-purpose professional vocal and instrument
microphone
Ultra-sensitive neodymium element for highest
output
Excellent off-axis rejection for superior gain before
feedback
Extended range frequency response for optimum
reproduction and exceptionally clear, crisp sound
Rugged zinc alloy body
Gold-plated XLR connector
Dent-resistant spring steel grill
Low handling noise
SPECIFICATIONS
Transducer Type Dynamic
Frequency Response 50Hz -18KHz
Polar Pattern Supercardioid
Output Impedance 250ohms
Sensitivity -54dB (0dB=1V/Pa)
o
Off-axis rejection >25dB at 125
Maximum SPL >135dB
Cable/Connector 3 pin gold plated male XLR
Positive voltage on pin
Polarity 2 relative to pin 3 of
output XLR connector
Housing Zinc alloy
Weight 300 gram
Polar Charts (Range: 40dB)
1KHz 2KHz 5KHz
o
0
o
0
o
0
Microphone Frequency Response dB ref 1V/Pa
OVERVIEW